Two Of The Most Jadescape psf Important Architectural Drawings Project


You may have decided that, in order to get the house you’ve always dreamed of Jadescape psf, the best idea is to hire a respected residential architect. However, you may have some reservations, especially as you think that you might not be able to understand the designer’s jargon, in order to have meaningful conversations. While the architect has been trained to visualize spaces in 3 dimensions based on technical drawings, you may have some difficulty doing the same. Don’t let these issues handicap the design process Jadescape psf ! Let me try to help out with some clarification of some of the terms you may encounter during your dealings with your architect.

 

Types of Drawings

 

As you go through the design process, your architect will present a variety of drawings to you, to present the design options. Some of these may make more sense to you than others,

 

Jadescape psf here’s a quick overview of the major drawing categories

 

Plans – This is likely the most familiar drawing, as it presents a horizontal “map” of the spaces. Conceptually, imagine taking a building and slicing it right at about waist height, then looking down; that is what a Floor Plan is meant to show. A Reflected Ceiling Plan, on the other hand, imagines that the floor is covered with mirrors, so instead of looking down you’re really looking up to see the ceiling features. One other plan type is the Site Plan, which shows the property and locates the new features, often demonstrating that Zoning rules such as a minimum setback or yard depth is being met.

 

Elevations – An elevation is close to what the building will actually look like, since it doesn’t involve any conceptual slicing. Rather, it shows the building in a vertical plane, as though you were standing far away and viewing it with a telescope (in other words, without any distortion caused by perspective). In the real world, of course, we always view things in perspective, meaning that elements closer to us appear bigger than elements further away.

 

Exterior Elevations show the outside of the building

 

Sections – Section drawings are somewhat like x-rays of a building, intended to show what is going on within the hidden spaces. Similar to how Plans are drawn by imagining a slicing of the building horizontally, Sections imagine a slice (usually vertical) happening wherever their “cut line” is, as represented on a Plan or Elevation. A Building Section will extend the cut line all the way across the building and show the entire width of it, whereas a Wall Section just cuts across a single wall to show how that wall is built.

 

Details – Details can usually fit into one of the above categories (Plans, Elevations, Sections) but they tend to show only a limited condition, at an enlarged scale so that more specific information can be presented.

 

Schedules (drawings) – While not as common for residential drawings sets, sometimes Schedules may be used to present information. In this sense, a Schedule has nothing to do with time, but rather it is a table or spreadsheet that lists a number of similar items. For instance, a Door Schedule will list each door and describe its qualities, such as what kind of hardware it will use, or its size. By doing so, this information does not have to appear on the other drawings. A Room Finish Schedule will describe the finish materials used on each wall, ceiling, and floor surface.

 

Schedules (construction) – Your architect will use the time or calendar sense of the term Schedule when discussing project timeframes, and will be able to work backwards from your targeted completion date to determine when the various phases of the Design Process (see below) need to be complete. If your architect also provides Construction Management services, then a more detailed Construction Schedule can be developed as well.

Next ArticleKenko Antioxidant For Good Health and Anti Aging